Can be positioned before the filter as recommended by the HSG 282 directive
Flexible positioning to give optimised dispersion
Fully adjustable flow rate
Clear plastic gives ‘easy to see’ contents do not need to be removed to be checked
Quick and simple to refill
Can be checked and filled without the need to remove filters or switch off pumps
No extra expense to filter costs
Made from XYLEX resin
For the best result, the spa pal dispenser should be installed near the filter area on your spa.
The ‘dock’ can be attached to side walls or catch trays.
If using double-sided tape pads, first make sure all surfaces are clean and dry.
The removable end cap should be facing downwards when positioned in the holder
Directions for use:
To remove the end cap, rotate to align the arrows on the end cap and dispenser body. Then slide off the end cap.
Insert the sanitising tablets into the dispenser body. Replace the end cap by re-aligning the arrows. Twist the end cap to lock in place
Further, rotate the end cap to open the dispenser slots to the required position. Monitor your sanitiser reading and adjust the slot position to increase or decrease the levels of sanitiser in the spa.
Place the dispenser into the ‘dock’
Need some help or advice? Call 0116 251 3378 or email us at email@example.com
11 Midland Street Cultural Quarter Leicester Leicestershire LE1 1TG
Monday to Friday 9.00am to 5.00pm
Greenacres Garden Centre Ashby Road Stapleton Leicester Leicestershire LE9 8JE
Monday to Saturday 9.00am to 5.00pm
Sunday 10.00am to 5.00pm