We recommend that you use Hot Tub Power Flush when your hot tub has heavy scale that needs removing.
1.Remove the Filter Catridge(s)
Ensure the water is at the normal operting level (At least 2cm above the highest jet) & temperature.
2.Turn on all pumps and add 250ml of Power flush per 1750 litres of water.
3.Fully open all circulation valves and run pumps for a minimum of 15 minutes,
4.Turn off all pumps and allow water to stand for a minimum of 60 minutes.
5. Drain the hot tub.
6. Rinse the jets and shell using a hose pipe and wipe it all down.
7. Refill the hot tub and start your usual process.
8. Replace the filter cartridge(s)
9. Re-sanitise your hot tub to the recommended level.
Need some help or advice? Call 0116 251 3378 or email us at email@example.com